Skip to content

HomePlug powerline networking adaptors buying advice




One of the biggest issues experienced by most independent professionals when setting up a "Work from home" office, is finding a room in the house where wireless signal is strong enough, and the seating arrangements comfortable enough to work.

One of biggest restrictions on using a room in the house could be the lack of WiFi signal. In some cases some freelancers may have to resort to some unsightly trip hazard CAT5 cabling strewn all over the house just to get a days work done. However, there is another way Powerline technology.

A buyers guide to Homeplug adaptors

Powerline technology allows you to create a computer network using the existing mains electrical wiring in your home or office. This enables you to extend the network to any room that has a spare power socket. This is especially useful for remote rooms where a Wifi signal might not be able to reach.

This a great option - not just for computers but also any internet enabled devices i.e. gaming consoles, Smart TV's etc. that require a wired network connection but may be some distance away from your router or even in a different room.

How many adaptors do you need?

You need a minimum of two adapters to start a homeplug network, and most types of HomePlug networks will enable you to have up to 8 other adapters.




Compatibility between standards

In order to ensure compatibility between products from different manufacturers, most products have adopted a standard networking protocol called HomePlug. In fact, the terms ‘powerline’ and ‘HomePlug’ are often used as though they’re interchangeable, but there are competing standards. HomePlug is the most popular, though.

Kits that support the HomePlug standard may run at different speeds – most of the kits reviewed here adopt the HomePlug AV standard which nominally operates at 200 megabits per second (Mbps), which is fine for web browsing and most streaming video.

However, if multiple computers need to play high-speed online games and stream high-def video at the same time you might want to consider slightly more expensive kits that run at 500Mbps (also known as HomePlug AV2). There are also ‘gigabit’ kits starting to come out, which run at 1000Mbps, although these are still relatively rare and quite expensive.

You can mix and match Powerline adaptors running at different speeds and from different manufacturers – as long as they all support at least HomePlug AV. Naturally, faster adaptors can talk to slower ones only at the lower speed.

Beware of older kits still on sale that are based on an earlier standard called HomePlug 1.0. These run at a maximum speed of 85Mbps – which will probably still be adequate for many home users – but they’re not compatible with faster HomePlug AV products running at 200Mbps or more. They'll co-exist on the same mains wiring, but cannot talk to each other. Most home users should probably stick with newer HomePlug AV products in order to keep things simple.

Features

As well as providing a simple plug-and-play network connection, there are other features that you might want to look out for too. Most Powerline adaptors only include a single Ethernet port, but you can buy adpators with three or four Ethernet ports, which makes them great for connecting multiple devices to one mains outlet.

If there are rooms in your home that can’t receive a good Wi-Fi signal, look for a kit with a ‘Wi-Fi extender’ option. You plug one of the adaptors into a mains socket in the room in order to create a wired connection to your main router, and then use the adaptor’s wireless features to set up a mini Wi-Fi network as well. Such adaptors also have one or more Ethernet ports.




Finally, some adaptors have a mains passthrough socket, which effectively gives you back the mains socket the adaptor would otherwise be occupying

Limitations

There are a few things to bear in mind if you want to get best performance from your powerline network.

  • The distance between sockets shouldn’t be a problem in most homes and office, but the age of the electrical wiring may affect performance in some older buildings.
  • You shouldn’t plug a powerline adaptor into a multi-way extension either – they really need to be plugged directly into a mains socket in your wall. You can try your adaptors in a multi-way extension but don't be surprised if they can't connect to each other or have much reduced transfer speeds.
  • Talking of transfer speeds, you may also find that some electrical devices, such as mobile phone chargers, can cause interference if they’re plugged in somewhere in your home on the same ring main.
  • You can enable encryption in adaptors, but they will only talk to other adaptors on the same mains network (usually wiring that's attached to one electricity meter). This means your neighbours in a block of flats, for example, won't be able to access your network if they install some adaptors too.

For the most part, though, powerline networking really is enormously straightforward. It’s simpler than setting up an Ethernet network, and can reach further than a Wi-Fi network. That makes it ideal for both home and business users who want to connect multiple rooms to their network with the minimum of fuss.

Gary Woodfine
Latest posts by Gary Woodfine (see all)